It looks like you're new here. If you want to get involved, click one of these buttons!
Nicely done ! Care to show the backside? I've got some learning to do with managing the corners- thx
https://www.jfcomponents.com/
Or use staples.
And boom a shop surround sound is done.
The spray glue just a temporary tack until the Superglue/staples lock it down for good?
Yes, and finding a temporary tack spray glue is almost impossible. And one that has a fine mist and doesn’t stain light colored grill cloth.
Gee, thanks for setting the bar VERY HIGH ! Kidding of course, but the corner work fronts and back are smoooooth.
@tajanes said: Gee, thanks for setting the bar VERY HIGH ! Kidding of course, but the corner work fronts and back are smoooooth.
I build a lot of grills.
Doing some stupid idea stuff for Iowa.
That reminds me of the horns that mount under a car dash.
Close Ed. It’s modeled from a few different ones.
I believe this project is put on hold as the woofer/subs won’t make it in time. Guess I’ll have to come up with something else.
@Ed_Perkins said: That reminds me of the horns that mount under a car dash.
Always wanted to try that, never got to here a system set up with them.
I remember that install. I seem to recall it was in a Buick Grand National. 8" in the doors or kick panels and those funky long wave guides under the dash.
The original, "Ghetto Blaster" . . .
It was Richard Clark’s grand national. But a lot of people used wave guides back in the day.
Yup I still have a shit load of old CSR and CarAudio mags from back then.
Me too...
InDIYana Event Website
Switching projects for Iowa23. I’m gonna need a pair of these so making a plug then a mold tomorrow. Ceos6
[Rubs hands together and smiles like Mr. Burns . . .]
I’ll be bring some of these to Iowa for some feedback. Outriggers measurements approximately 1.5”x5”
I’ve been feet dragging.
My pair needed
Well I had to modify it to accommodate the tweeter I want use. http://www.wavecor.com/html/tw022wa05.html
That throat opening looks very suspect to cause issues...
@PWRRYD said: That throat opening looks very suspect to cause issues...
Yeah, I am Riggen up something so I can test it.
Here’s what I come up with.
0,15,30,45deg
The blue line is 15° vertical at 16 inches
Looks pretty good to me.
Comments
Nicely done !
Care to show the backside? I've got some learning to do with managing the corners- thx
https://www.jfcomponents.com/
Or use staples.
https://www.jfcomponents.com/
And boom a shop surround sound is done.
https://www.jfcomponents.com/
The spray glue just a temporary tack until the Superglue/staples lock it down for good?
Yes, and finding a temporary tack spray glue is almost impossible. And one that has a fine mist and doesn’t stain light colored grill cloth.
https://www.jfcomponents.com/
Gee, thanks for setting the bar VERY HIGH ! Kidding of course, but the corner work fronts and back are smoooooth.
I build a lot of grills.
https://www.jfcomponents.com/
Doing some stupid idea stuff for Iowa.
https://www.jfcomponents.com/
That reminds me of the horns that mount under a car dash.
Close Ed. It’s modeled from a few different ones.
https://www.jfcomponents.com/
I believe this project is put on hold as the woofer/subs won’t make it in time. Guess I’ll have to come up with something else.
https://www.jfcomponents.com/
Always wanted to try that, never got to here a system set up with them.
I remember that install. I seem to recall it was in a Buick Grand National. 8" in the doors or kick panels and those funky long wave guides under the dash.
The original, "Ghetto Blaster" . . .
It was Richard Clark’s grand national. But a lot of people used wave guides back in the day.
https://www.jfcomponents.com/
Yup
I still have a shit load of old CSR and CarAudio mags from back then.
Me too...
InDIYana Event Website
Switching projects for Iowa23. I’m gonna need a pair of these so making a plug then a mold tomorrow. Ceos6
https://www.jfcomponents.com/
[Rubs hands together and smiles like Mr. Burns . . .]
I’ll be bring some of these to Iowa for some feedback. Outriggers measurements approximately 1.5”x5”
https://www.jfcomponents.com/
I’ve been feet dragging.
https://www.jfcomponents.com/
My pair needed
https://www.jfcomponents.com/
Well I had to modify it to accommodate the tweeter I want use. http://www.wavecor.com/html/tw022wa05.html
https://www.jfcomponents.com/
That throat opening looks very suspect to cause issues...
Yeah, I am Riggen up something so I can test it.
https://www.jfcomponents.com/
Here’s what I come up with.
https://www.jfcomponents.com/
0,15,30,45deg
https://www.jfcomponents.com/
The blue line is 15° vertical at 16 inches
https://www.jfcomponents.com/
Looks pretty good to me.