@hifiside said:
This is a 90 mm mounting diameter. The tweeters need to be a much smaller form factor like an LD 22 or a DX 20 something like that. For the ceos6.
Would a SB Acoustics SB26STCN-C000-4 possibly work? It appears to have has a flat 72 mm faceplate. The possible problem is the face plate doesn't end with a sharp edge around the driver.
In any case - if you make the mounting flange accommodating M4 or M5 wide bolt slots for the CEOS-6 and CEOS-8 like the attached sketch you wont have to concern yourself with all the research behind tweeter mounting data, would you?
I’ll look into it Ed. And no Steve it wouldn’t be my concern but it be a nice selling point to know what those horns fit because I had a hell of a time trying to find out what a SEO8 horn would fit.
Let me know what the minimum and maximum hole mounting circle dimensions are for your CEOS-6 and 8 [if you plan to offer that as well] and I will keep you apprized of my research for applicable candidate tweeters as I had done 8 posts upthread.
This way you don't have to do anything but verify my findings - maybe other guys here will add to the list[s] if we start a dedicated thread for each specific horn/waveguide???
Any chance you are going to start carrying larger gauge air core inductors? Thinking like at 14awgor so. Seems like there is a gap in the market for those now the Meniscus is out and PE doesn't seem to carry many any longer also.
@johnny5jz said:
Any chance you are going to start carrying larger gauge air core inductors? Thinking like at 14awgor so. Seems like there is a gap in the market for those now the Meniscus is out and PE doesn't seem to carry many any longer also.
Yes. I was waiting till the winding machines show up before announcing that. But we will be offer custom larger ga coils through JFcomponents.
Comments
Ahhh, a little tweet faceplate modification, it'll be fine.
OK - that makes it crystal-clear
Would a SB Acoustics SB26STCN-C000-4 possibly work? It appears to have has a flat 72 mm faceplate. The possible problem is the face plate doesn't end with a sharp edge around the driver.
In any case - if you make the mounting flange accommodating M4 or M5 wide bolt slots for the CEOS-6 and CEOS-8 like the attached sketch you wont have to concern yourself with all the research behind tweeter mounting data, would you?
I’ll look into it Ed. And no Steve it wouldn’t be my concern but it be a nice selling point to know what those horns fit because I had a hell of a time trying to find out what a SEO8 horn would fit.
https://www.jfcomponents.com/
So a 1" neo tweeter with a smaller than 90mm faceplate that has a sharp transition to the dome? Any other important criteria?
I have a pair of the SB26STCN on the shelf I could send you for testing. Just let me know your shipping address if you're interested.
Let me know what the minimum and maximum hole mounting circle dimensions are for your CEOS-6 and 8 [if you plan to offer that as well] and I will keep you apprized of my research for applicable candidate tweeters as I had done 8 posts upthread.
This way you don't have to do anything but verify my findings - maybe other guys here will add to the list[s] if we start a dedicated thread for each specific horn/waveguide???
I have not used of this tweeter, but I'm sure others have
https://heissmann-acoustics.de/en/test-vifa-peerless-xt25-neo4-xt25sc90-04/
6000+ available at Digikey: https://www.digikey.com/en/products/detail/peerless-by-tymphany/XT25SC90-04/6557546
Looks like you could cut some glue, twist off the faceplate, sand it flat, put it back on and mount the waveguide.
Got a few more pictures to get up but they’re on.
https://www.jfcomponents.com/product-page/jf-1204f-4ohm-soft-dome-tweeter
https://www.jfcomponents.com/
I have a pair in my basket, Sir - thanks!!
(My SEOS-8's are waiting for them . . .)
Gotta pay them bills!!!. Lol. Thanks to everyone that has ordered from us I appreciate tremendously. More new stuff coming!!!! Stay tuned….
https://www.jfcomponents.com/
Some pictures of my latest install with JF speakers.
https://www.jfcomponents.com/
They fit in well on those walls !
Any chance you are going to start carrying larger gauge air core inductors? Thinking like at 14awgor so. Seems like there is a gap in the market for those now the Meniscus is out and PE doesn't seem to carry many any longer also.
Yes. I was waiting till the winding machines show up before announcing that. But we will be offer custom larger ga coils through JFcomponents.
https://www.jfcomponents.com/
Now that's a fucking garage! Sweet!
Nice panos. How high is the ceiling? Must be great for hoisting speakers up high and setting a long measurement gate!
This isn’t my shop its a customers
https://www.jfcomponents.com/
We’re gonna hide some subs under the stairs for the little system.
https://www.jfcomponents.com/
Now to figure out how to assemble it and use it.
https://www.jfcomponents.com/
Is that from Meniscus?
Yes
https://www.jfcomponents.com/
Your friend circled in red:
Sometimes I forget it just a subwoofer enclosure.😆
https://www.jfcomponents.com/
No attention to detail…
That is cool!
I mean, you have CNC, why not?😛
Little test fit before I close this up.
https://www.jfcomponents.com/
Subwoofer Saturday!
https://www.jfcomponents.com/