I was ask to make “cheaper” hanging speaker for a few people. Guess my cheap shelving material will be getting used. I have plenty of drivers to use. I cnc the sides and the front and table saw the rest.
These? It takes some time going through 100 of them and I had to wait for labels but they should be on the website on Monday or Tuesday. Just finishing up measurements.
Probably need to settle upon a few drop-in hole mounting diameter flat faceplate tweeters and call it good for those selected - all others need an adapter made by the user.
Seems like 90 ~ 99mm mounting circle covers a lot of tweeters.
Suggestions:
Seas 27TDFC - 92mm mounting circle
SEAS Prestige 27TDC - 92mm mounting circle
SEAS Prestige 27TFFC - 92mm mounting circle
SEAS Prestige 25TFFC - 92 mm mounting circle - nice rising response, too
RST28F-4 - 90mm mounting circle - little filing w/ rat-tail file will fit the above mounting circles
@hifiside said:
This is a 90 mm mounting diameter. The tweeters need to be a much smaller form factor like an LD 22 or a DX 20 something like that. For the ceos6.
Would a SB Acoustics SB26STCN-C000-4 possibly work? It appears to have has a flat 72 mm faceplate. The possible problem is the face plate doesn't end with a sharp edge around the driver.
In any case - if you make the mounting flange accommodating M4 or M5 wide bolt slots for the CEOS-6 and CEOS-8 like the attached sketch you wont have to concern yourself with all the research behind tweeter mounting data, would you?
I’ll look into it Ed. And no Steve it wouldn’t be my concern but it be a nice selling point to know what those horns fit because I had a hell of a time trying to find out what a SEO8 horn would fit.
Comments
A carbon fiber one would look bitchin!
I was ask to make “cheaper” hanging speaker for a few people. Guess my cheap shelving material will be getting used. I have plenty of drivers to use. I cnc the sides and the front and table saw the rest.
https://www.jfcomponents.com/
Cutting open copper capacitors 🤷🏻♂️
https://www.jfcomponents.com/
Will this be a new JF product?
InDIYana Event Website
Maybe.
https://www.jfcomponents.com/
How big is that 3.3uF? Wowzers...
InDIYana Event Website
40x62mm I thought it would have been bigger.
https://www.jfcomponents.com/
Slow boat showed.
https://www.jfcomponents.com/
Excellent . . . . [rubs hands together] . . .
Um ... what was on the slow boat?
Tweeterz and stuff that looked good upthread . . .
HD 100th Anniversary tank I found on the shelf upstairs.
https://www.jfcomponents.com/
Yes .drivers
https://www.jfcomponents.com/
https://www.jfcomponents.com/
I do love making crossovers.
https://www.jfcomponents.com/
Sweet!
Purdy!
I should really find a way to mass produce my bubble gum
https://www.jfcomponents.com/
You're holding out on us with those damn tweeters (5 posts upthread) and CEOS-6's but the bubble gum isn't really my color, buddy.
These? It takes some time going through 100 of them and I had to wait for labels but they should be on the website on Monday or Tuesday. Just finishing up measurements.
https://www.jfcomponents.com/
Thanks for the update, Sir!
Any expectations on the CEOS-6's or are those an in-house only product? (I'd love to have a pair or two if they work well for me).
Finding the right size tweeters forum is what I’m having a problem with on the ceos6
https://www.jfcomponents.com/
Probably need to settle upon a few drop-in hole mounting diameter flat faceplate tweeters and call it good for those selected - all others need an adapter made by the user.
Seems like 90 ~ 99mm mounting circle covers a lot of tweeters.
Suggestions:
Seas 27TDFC - 92mm mounting circle
SEAS Prestige 27TDC - 92mm mounting circle
SEAS Prestige 27TFFC - 92mm mounting circle
SEAS Prestige 25TFFC - 92 mm mounting circle - nice rising response, too
RST28F-4 - 90mm mounting circle - little filing w/ rat-tail file will fit the above mounting circles
https://www.parts-express.com/pedocs/specs/292-770--visaton-wg220x150-spec-sheet.pdf
ScanSpeak Discovery D2606/9220 - 94mm mounting circle - good fit for Visation WG
Peerless D27TG35-06 - 94mm mounting circle - good fit for Visation WG
## Maybe make the bolt mounting on the CEOS-x flange hole a **slot to accept different hole spacing circle diameters???**
This is a 90 mm mounting diameter. The tweeters need to be a much smaller form factor like an LD 22 or a DX 20 something like that. For the ceos6.
https://www.jfcomponents.com/
No more bubblegum color.
https://www.jfcomponents.com/
Ahhh, a little tweet faceplate modification, it'll be fine.
OK - that makes it crystal-clear
Would a SB Acoustics SB26STCN-C000-4 possibly work? It appears to have has a flat 72 mm faceplate. The possible problem is the face plate doesn't end with a sharp edge around the driver.
In any case - if you make the mounting flange accommodating M4 or M5 wide bolt slots for the CEOS-6 and CEOS-8 like the attached sketch you wont have to concern yourself with all the research behind tweeter mounting data, would you?
I’ll look into it Ed. And no Steve it wouldn’t be my concern but it be a nice selling point to know what those horns fit because I had a hell of a time trying to find out what a SEO8 horn would fit.
https://www.jfcomponents.com/