When I was a kid, I went with my father to visit one of his friends, an EE working at Battelle Memorial Institute (located next to THE OSU) and his basement was full of test equipment, in the most orderly basement I have ever seen. Fond memories as he gave me an old army walkie-talkie and an old radio to take apart and play with. Way, way too cool. Why I didn’t go into EE and opted for law ???
This guy also gave me a wooden puzzle. I could not figure out how to get it apart. About a month later he told me he soaked it in boiling water. Ha
The display is so much nicer on old analog/CRT scopes, but having the voltage measurements right on the screen are such a convince on the newer digital junk. Not to mention the size.
I picked up this Heathkit IO-4210 10Mhz dual trace a few years ago at a local hamfest. It is 17" deep! Works great!. Manual is dated 1984. What I like about this old scope, compared to my newer digital one, is the nice, smooth continuous trace that you get when using it as a transistor curve tracer. My newer digital scope is very granulated and messy looking.
Yeah I really enjoyed working with them in my college electronics courses. That and the analog multimeters. I might need to get one of those too. Not so precise, but much easier to get a ballpark value compared to numerical displays that jump around alot.
Here’s another hobby my wife got me into. She purchased it for $10 on marketplace it was a wobbly mess but it was round ( for our wild dog) and I liked the veneer work on the tops. I’m gonna refinish it a little lighter than factory was.
Landed a new job, will be starting right after Indy. Going back to maintenance manager role. Very excited to make quite a bit more money, as well as having direct reports again.
It is a new position for the company, so I get to build it from the ground up which is exciting.
@jr@mac said:
Landed a new job, will be starting right after Indy. Going back to maintenance manager role. Very excited to make quite a bit more money, as well as having direct reports again.
It is a new position for the company, so I get to build it from the ground up which is exciting.
I feel if this was an active setup with baked in dsp to add some more extension and make use of the xmax it would probably give a much more impressive experience.
@ani_101 said:
Does it have to be a dayton tweeter? that too the new RST one?
It's a Dayton speaker so no way are they going to use a non-Dayton driver. I'd say the RST28F is their best non-AMT tweeter, which doesn't necessarily mean much as I think their tweeter selection has fallen behind SBA.
Comments
Just picked this up.
'Sucker is a good 16"+ deep. I see why folks save for digital scopes (1/4 the size and probably 4x more versatile). But it was cheeeap.
I'm old, I still find an analog scope more intuitive, but I have a digital as well.
When I was a kid, I went with my father to visit one of his friends, an EE working at Battelle Memorial Institute (located next to THE OSU) and his basement was full of test equipment, in the most orderly basement I have ever seen. Fond memories as he gave me an old army walkie-talkie and an old radio to take apart and play with. Way, way too cool. Why I didn’t go into EE and opted for law ???
This guy also gave me a wooden puzzle. I could not figure out how to get it apart. About a month later he told me he soaked it in boiling water. Ha
That scope looks really clean. Nice score!
The display is so much nicer on old analog/CRT scopes, but having the voltage measurements right on the screen are such a convince on the newer digital junk. Not to mention the size.
I picked up this Heathkit IO-4210 10Mhz dual trace a few years ago at a local hamfest. It is 17" deep! Works great!. Manual is dated 1984. What I like about this old scope, compared to my newer digital one, is the nice, smooth continuous trace that you get when using it as a transistor curve tracer. My newer digital scope is very granulated and messy looking.
Yeah I really enjoyed working with them in my college electronics courses. That and the analog multimeters. I might need to get one of those too. Not so precise, but much easier to get a ballpark value compared to numerical displays that jump around alot.
The Simpson 260 is pretty much the gold standard. I see them on craigslist every once in a while for $75 to $150.
I still have the 260 that I used in high school. They were phasing out the electronics class so my instructor told me to just take it.
Here’s another hobby my wife got me into. She purchased it for $10 on marketplace it was a wobbly mess but it was round ( for our wild dog) and I liked the veneer work on the tops. I’m gonna refinish it a little lighter than factory was.
https://www.jfcomponents.com/
The refinish Progress. It’s actually made out of some pretty good wood. I was surprised moving forward.
https://www.jfcomponents.com/
Landed a new job, will be starting right after Indy. Going back to maintenance manager role. Very excited to make quite a bit more money, as well as having direct reports again.
It is a new position for the company, so I get to build it from the ground up which is exciting.
InDIYana Event Website
In SW Ohio we had a historical 68% chance at clouds for today, but got lucky that is stayed clear.
What did you take those pics with? All I got with the phone was a blurry white orb.
Congratulations!!!
I placed the lens of a pair of viewing glasses over the cell camera, and then zoomed way in. That is what I got.
InDIYana Event Website
Not my pic, but a local photographer shot this in Sioux Falls. Pretty much what I saw peeping through the clouds.
Forgot to mention a serious perk of my new employer - my office will be one block away from Brad's shop... Might be dangerous, though.
My cell.
Done.
https://www.jfcomponents.com/
.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
Does it have to be a dayton tweeter? that too the new RST one?
I feel if this was an active setup with baked in dsp to add some more extension and make use of the xmax it would probably give a much more impressive experience.
It's a Dayton speaker so no way are they going to use a non-Dayton driver. I'd say the RST28F is their best non-AMT tweeter, which doesn't necessarily mean much as I think their tweeter selection has fallen behind SBA.
At least they didn't rip off an existing name.
Got voluntold to do the Habitat for Humanity thing for work today.