@rjj45 said:
I've got some of those! You might try the experiment often reported to line the back side of the horn with "bitumen", which in this day means "stuff to damp car doors". (but works the same)
Like I did with the 6.5x12” picture above.?
Yeah. Missed that.
But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
That's no moon... (literally first thing that came to mind seeing that lol)
Well.. if those are 6.5" woofers in the MTM then that is close to 12" wide. Probably 44"+ tall since an MTM tower.
And that 18" looks to have plenty of space on either side so around 24" deep. That's 5.8cf by those measurements.
Made a new video on some Benjamin Moore fast sanding primer. This primer will replace my white pigmented shellac primer (BIN)-(SW) that I use now. As the coverage and film thickness is twice as good as shellac base primers, but with it being a acrylic primer, there is a couple things that you have to be careful with..
@6thplanet said:
As John mentioned, audio is to low and back ground noise is a little high. Just trying to help you make better videos, great that your doing this🤘🏼
Thanks for the feedback as always, and I will be addressing those issues in the next video.
If anyone has a kit they want to share I’d love to make it available on my website. I’m working on the TMWW that JR made with Mac drivers.
Things required:
-Drivers used.
-Baffle size.
-Offsets
-Cabinet tune
-Crossover Specs
Comments
Yeah. Missed that.
Since we lost power for about 8 hrs yesterday. I only went down 1 rabbit hole.
https://www.jfcomponents.com/
Do tell ^, please.
"Oops all dustcap"
Already got my mind on the next build.
https://www.jfcomponents.com/
OB 18? How are you getting 4 cuft+ in that cabinet?
It’s not small. Should be approximately 5.25cu.ft @33hz- F3@30hz. Nothings written in stone yet.
https://www.jfcomponents.com/
That's no moon... (literally first thing that came to mind seeing that lol)
Well.. if those are 6.5" woofers in the MTM then that is close to 12" wide. Probably 44"+ tall since an MTM tower.
And that 18" looks to have plenty of space on either side so around 24" deep. That's 5.8cf by those measurements.
Made a new video on some Benjamin Moore fast sanding primer.
This primer will replace my white pigmented shellac primer (BIN)-(SW) that I use now. As the coverage and film thickness is twice as good as shellac base primers, but with it being a acrylic primer, there is a couple things that you have to be careful with..
https://www.jfcomponents.com/
As John mentioned, audio is to low and back ground noise is a little high. Just trying to help you make better videos, great that your doing this🤘🏼
Thanks for the feedback as always, and I will be addressing those issues in the next video.
https://www.jfcomponents.com/
Threw down some Tricorn Black Satin Gallery Series over 3 coats of Fast Sanding Primer.
https://www.jfcomponents.com/
Gorgeous
Bless your heart sir , I wouldnt have the patience to do youtube vids. Good vid.
What type of roller do you use for the primer?
I usually use the cheap foam rollers.
1/4 nap on this one for build.
https://www.jfcomponents.com/
So how'd the ribbon w/ MAC05 do?
????
https://www.jfcomponents.com/
on the left
I gave those to JR for his new build.
https://www.jfcomponents.com/
https://www.jfcomponents.com/
If anyone has a kit they want to share I’d love to make it available on my website. I’m working on the TMWW that JR made with Mac drivers.
Things required:
-Drivers used.
-Baffle size.
-Offsets
-Cabinet tune
-Crossover Specs
https://www.jfcomponents.com/
Making some gorilla coffins. 😳
https://www.jfcomponents.com/
The gorilla coffins in perspective. 😍
https://www.jfcomponents.com/
...better bolt down the chair
Maxell....
https://www.teepublic.com/t-shirts?query=maxell
InDIYana Event Website
We should ‘borrow’ the concept and put ‘Midwest Audio Club’ under the picture…
Now that’s a Tee I’d buy
Reminds me of..
https://techtalk.parts-express.com/forum/speaker-project-gallery/1491257-kitchen-cupboard-3-way-build
Made this as a FB cover photo a few years ago:
If Maxell wouldn't hand my ass to me, I would make arrangements for that. Great idea.