Design with Dynavox LW6004HR….

joeybutts

With a smaller format tweeter? I’d like to pick up DanP’s pair, but am struggling to find a well documented two-way with a smaller format tweeter. This would be for a Bluetooth radio, so not critical listening of any kind…. Thanks guys!

kenrhodes

https://diy.midwestaudio.club/discussion/1769/indiyana-2022-missing-link-theme-announcement/p1

joeybutts

Thanks Ken! That is perfect, now to choose from the multitude of crossovers😉

ugly_woofer

Just use the winning one.

Wolf

Be sure to move the lpad to after the xover on the tweeter though if you do. Otherwise, the impedance will ride at 2 ohms.
I thought mine was pretty good too.

kenrhodes

I have those drivers on the shelf. If you need any help let me know.

kenrhodes

My design was a little laid back, trying to make sure the tweeter wasn't too stressed, I typically prefer laid back over a bright speaker. Bill (4thtry) had some great notes and insight on the competition.
I think you would be very safe picking any of the well known designers crossovers, there is a lot of documentation and even some graphs for comparison.

ugly_woofer

You can build multiple xovers and find the one you like best. It wouldn't be that expensive.

joeybutts

Thanks, gentlemen! Lots of good thoughts and would be interesting to see the different sound, even in a non-critical listening setup. Will report back with a move. Need to measure the enclosure and also ensure it will all fit appropriately…. Though pretty sure not an issue.