Thanks Nick. I sure hope so. I think those little Tang Band W3-1364SA mids should work well. I like the fact that they are an under-hung design, have a neo magnet, have a copper ring , and a super light weight moving mass (1.78 g). My simulations show that the pair of them will easily keep up with the RS270P-4 if I let the woofer carry the bulk of the BSL weight. That means crossing around 400-500 Hz is easy peazy. I've used its bigger brother the W4-1320SIF and really liked the thin bamboo cones.
Nothing ground breaking here but a lot of times I get frustrated trying to hold or balance something during assembly. Since 99.9% of my projects are one and done I don't feel right building jigs out of expensive wood products. So I stand back for a few minutes and look around to see what I have on hand...
This is just a leftover box that was going to the recycling can later today:
So far so good! Very happy with how these are turning out... hopefully I don't screw them up moving forward. I am almost close enough that I can take some meaningful measurements before committing to spending the time and money on finishing products.
I'll just cut some semi-circles out of scrap wood and gorilla glue them in. I plan to cap the entire top and bottom of the speakers with nice pieces of hardwood after I veneer the bodies.
@PWRRYD said:
I'll just cut some semi-circles out of scrap wood and gorilla glue them in. I plan to cap the entire top and bottom of the speakers with nice pieces of hardwood after I veneer the bodies.
This was a build with kerf cut bending, but I like your sonotube build better.
But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
I got all eight semi-circles glued in. They fit so well I didn't have to use Gorilla glue (I don't really like that stuff), just my standard Titebond III. Weather is gonna suck for a while but I should be able to fill the tubes with kitty litter and get some decent preliminary measurements for a "this project should work vs these are going to the burn pile".
Years ago I filled some metal speaker stands with aquarium sand and it worked well. I think I went with sand over litter due to less moisture absorption?
I've used play sand before. It was very wet when I cut open the bag. I had to dry it in the sun for a few hours. I think the sand is about twice as heavy as the clay litter but I'm sure the litter will work perfectly fine for this. Walmart has a non-scented, non-clumping bag of it for < $2.00.
Side tubes filled with kitty litter and sealed up with some hot glue. I really packed it in there. Each speaker gained 7 pounds! They are dead as a rock to the knuckle rap test.
Comments
Visual creatures we are as humans - gonna use any brad nails or just glue and sand flush?
Thanks Nick. I sure hope so. I think those little Tang Band W3-1364SA mids should work well. I like the fact that they are an under-hung design, have a neo magnet, have a copper ring , and a super light weight moving mass (1.78 g). My simulations show that the pair of them will easily keep up with the RS270P-4 if I let the woofer carry the bulk of the BSL weight. That means crossing around 400-500 Hz is easy peazy. I've used its bigger brother the W4-1320SIF and really liked the thin bamboo cones.
Nothing ground breaking here but a lot of times I get frustrated trying to hold or balance something during assembly. Since 99.9% of my projects are one and done I don't feel right building jigs out of expensive wood products. So I stand back for a few minutes and look around to see what I have on hand...
This is just a leftover box that was going to the recycling can later today:
Some quick work with my Xacto knife:
So far so good! Very happy with how these are turning out... hopefully I don't screw them up moving forward. I am almost close enough that I can take some meaningful measurements before committing to spending the time and money on finishing products.
I hope to get to hear these, I'm digging it!
I'll just cut some semi-circles out of scrap wood and gorilla glue them in. I plan to cap the entire top and bottom of the speakers with nice pieces of hardwood after I veneer the bodies.
You could also do the classic cap the top and bottom and a grill cloth sock around the middle.
I'll have to look when I get home but I'm pretty sure the W3 surrounds sit proud of the baffle. Maybe the LD-22 dome too.
This was a build with kerf cut bending, but I like your sonotube build better.
Yep! That's what I'm thinking. Last time I used a 3/4" roundover on them. This time I might just do an 45 deg bevel.
This was the project:
Great designers think alike! I used TB w4-1320 bamboo mids in the cabs above.
I loved my W4-1320SIF drivers!
A little tracing with a sharp #2 pencil and I cut a template from Masonite, hardboard, whatever it's technically called
Only took about 1 minute each to cut these:
You just like the fact it has 1320 in the part number.😎
Well yeah, of course.
I got all eight semi-circles glued in. They fit so well I didn't have to use Gorilla glue (I don't really like that stuff), just my standard Titebond III. Weather is gonna suck for a while but I should be able to fill the tubes with kitty litter and get some decent preliminary measurements for a "this project should work vs these are going to the burn pile".
You're an animal. My projects alway take forever.
Time to stop at Walmart and pick up some kitty litter (we don't have a cat).
Years ago I filled some metal speaker stands with aquarium sand and it worked well. I think I went with sand over litter due to less moisture absorption?
I've used play sand before. It was very wet when I cut open the bag. I had to dry it in the sun for a few hours. I think the sand is about twice as heavy as the clay litter but I'm sure the litter will work perfectly fine for this. Walmart has a non-scented, non-clumping bag of it for < $2.00.
Yeah, play sand will have moisture. I used Black silica sand aquatic substrate from Imagitarium.
You defiantly don't want your speakers clumping - you want em thumpin'!
Wit meter turned up to 11 there Tom! Well played!
Side tubes filled with kitty litter and sealed up with some hot glue. I really packed it in there. Each speaker gained 7 pounds! They are dead as a rock to the knuckle rap test.
https://www.jfcomponents.com/
I purposely messed with my kids... I left the bag of kitty litter where they saw it when they got home from school
You bought kitty litter Craig? No oil dry in the garage? For shame.