So here is the list. I will try to find packaging material. Most of these are listed at just over the cost of shipping to the 48. Some are a little higher. All are very, very good deals. I do have TS for quite a few of them if interested. I'll combine and likely discount a bit for doing so.
Paypal, please.
Be patient, sometimes I get pretty busy at home and work so... Just be patient.
I'll have to see if that's to long. I'm routing a pickup pocket and I think that'll work, but I'll have to remove the existing pickup to verify the actual depth.
Thinking about buying a MiniDSP 2x4, probably the HD one, but having trouble talking myself into the purchase. Anyone have one that no longer gives you "fever" ?
(Re: all the best CN amps use fever components) LOL
But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
@6thplanet said:
I'll have to see if that's to long. I'm routing a pickup pocket and I think that'll work, but I'll have to remove the existing pickup to verify the actual depth.
Pics when you do this please. I need to do the same thing to this Jaguar build I have going on.
@rjj45 said:
Thinking about buying a MiniDSP 2x4, probably the HD one, but having trouble talking myself into the purchase. Anyone have one that no longer gives you "fever" ?
(Re: all the best CN amps use fever components) LOL
IIRC, there was one on diyaudio swap meet. May be gone by now.
@rjj45 said:
Thinking about buying a MiniDSP 2x4, probably the HD one, but having trouble talking myself into the purchase. Anyone have one that no longer gives you "fever" ?
(Re: all the best CN amps use fever components) LOL
Hey Don, I have one (non-HD) and without the housing that works great and you can have it for the cost of emailing me a label to slap on a box. PM me if you're interested and I'll send you the deets for the label.
@rjj45 said:
Thinking about buying a MiniDSP 2x4, probably the HD one, but having trouble talking myself into the purchase. Anyone have one that no longer gives you "fever" ?
(Re: all the best CN amps use fever components) LOL
Hey Don, I have one (non-HD) and without the housing that works great and you can have it for the cost of emailing me a label to slap on a box. PM me if you're interested and I'll send you the deets for the label.
Shit, you guys are the greatest!!!
YGM.
But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
Ok so the pocket right now is 5/8", the new pickup is 3/4" plus needs room for the foam under it. But now that I'm looking at it, I might be able to just forstner bit the excess out and use the 1/4" pattern bit to trim the pickguard to size. Guess I'll hit the drill press tomorrow.....
Man, if I lived anywhere near San Fran I'd scoop up those Jeff B MTM's that guy is selling at PE. Four RS180S, two RS28F, two RS28A, pair of gloss black .75 cf enclosures, binding posts and xo parts for only $180. Total steal!!!!
Forstner bit worked fine. Thanks for the offer John.
Nicholas23, I have a 1/4" pattern bit for the tight corners of pickups when you get at your project. Basically hog out the field with a forstner bit and clean it up with the template and pattern bit.
@jr@mac said:
So here is the list. I will try to find packaging material. Most of these are listed at just over the cost of shipping to the 48. Some are a little higher. All are very, very good deals. I do have TS for quite a few of them if interested. I'll combine and likely discount a bit for doing so.
Paypal, please.
Be patient, sometimes I get pretty busy at home and work so... Just be patient.
@jr@mac said:
So here is the list. I will try to find packaging material. Most of these are listed at just over the cost of shipping to the 48. Some are a little higher. All are very, very good deals. I do have TS for quite a few of them if interested. I'll combine and likely discount a bit for doing so.
Paypal, please.
Be patient, sometimes I get pretty busy at home and work so... Just be patient.
Craig, I will pull four of the MCM out for you.
JR do you have a current update to this list?
No RS52, no Beastmode tweeters, and the MCM -3669 are gone.
I suddenly have the bug to build another set of RS150-4 bookshelf 2 ways, and PE is backordered on these until 12/17. Anybody got a pair they can spare?
But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
Comments
I had one of these in my first car back in 1983 and it rocked!
So here is the list. I will try to find packaging material. Most of these are listed at just over the cost of shipping to the 48. Some are a little higher. All are very, very good deals. I do have TS for quite a few of them if interested. I'll combine and likely discount a bit for doing so.
Paypal, please.
Be patient, sometimes I get pretty busy at home and work so... Just be patient.
Craig, I will pull four of the MCM out for you.
I am open to trades, as well. I am always looking for fun stuff. I am interested in:
Computer hardware
Amplifiers
Tools
Make offers, don't be shy. For my own sanity, I have to move this stuff out.
Here are those SB:
I could use a good amp, but it's not a good time for me to be buying anything.
JR, I am curious what some of the drivers were in the "box" someone spoke for right away. Did you keep the Sony 5 1/4" midwoofs?
Primarily mcm stuff from when they were cleaning house awhile back.
The Sony went down the road awhile ago.
Anyone have a bit like this?
Yes. I've got a Bosch bit that is about an inch long 3/8 x 1 x 1/4. I've also got a big Yonico 3/4 x 2 x 1/2. You need me to send one?
Is the cutter an inch? Or cutter and bearing together is an inch?
The carbide is 1 inch then a 3/32 inch gap to the 1/8 inch bearing
An interesting chamfering tool, intended for metal , which I had never seen before.
I'll have to see if that's to long. I'm routing a pickup pocket and I think that'll work, but I'll have to remove the existing pickup to verify the actual depth.
A router bushing and 1/4 inch plunge bit would be easier imo
The template I have is for 1:1 bit.
Thinking about buying a MiniDSP 2x4, probably the HD one, but having trouble talking myself into the purchase. Anyone have one that no longer gives you "fever" ?
(Re: all the best CN amps use fever components) LOL
Pics when you do this please. I need to do the same thing to this Jaguar build I have going on.
IIRC, there was one on diyaudio swap meet. May be gone by now.
Hey Don, I have one (non-HD) and without the housing that works great and you can have it for the cost of emailing me a label to slap on a box. PM me if you're interested and I'll send you the deets for the label.
Shit, you guys are the greatest!!!
YGM.
Ok so the pocket right now is 5/8", the new pickup is 3/4" plus needs room for the foam under it. But now that I'm looking at it, I might be able to just forstner bit the excess out and use the 1/4" pattern bit to trim the pickguard to size. Guess I'll hit the drill press tomorrow.....
Man, if I lived anywhere near San Fran I'd scoop up those Jeff B MTM's that guy is selling at PE. Four RS180S, two RS28F, two RS28A, pair of gloss black .75 cf enclosures, binding posts and xo parts for only $180. Total steal!!!!
Forstner bit worked fine. Thanks for the offer John.
Nicholas23, I have a 1/4" pattern bit for the tight corners of pickups when you get at your project. Basically hog out the field with a forstner bit and clean it up with the template and pattern bit.
JR do you have a current update to this list?
No RS52, no Beastmode tweeters, and the MCM -3669 are gone.
Cool thanks, sent you a PM
JR - what's the full model number of the Wavecor tweeters?
I suddenly have the bug to build another set of RS150-4 bookshelf 2 ways, and PE is backordered on these until 12/17. Anybody got a pair they can spare?
I have a pair of RS150P-8 like new I'd sell.
Ahh, I looked closely at the RS150P for this, and it looked like the old RS150 aluminum was better in several ways.
So thanks, no.