›
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System

Looking for....

jr@macjr@mac
in Classifieds

5" woofers that play nice in 0.375 cubic feet. Used is fine. Trades are possible, I currently have a couple pairs of very nice tweeters I'm looking to unload.

I have a signature.

Comments

  • 4thtry4thtry

    I have a quad set of HiVi F5's that have been sitting on my shelf for years. Not sure if these would work for you. Xmax is only 2.5mm, but a pair of these would produce a nice vented alignment in 0.375 cu ft tuned to 48Hz.

  • Ed_PerkinsEd_Perkins

    Any of these look interesting?

    SB Acoustics SB13PFC25-8 2 5" Paper Cone Woofer 8 ohm New, pin cushion = 135 mm flats
    Zaph ZA14W08 2 5" Al. Cone Mid/Woofer New, frame = 139 mm
    Newark/MCM 55-3870 2 5" Al. Cone Mid/Woofer New, frame = 138 mm
    Dynavox LW5002PPR-S 2 5¼” Mid-bass NIB, cut corner frame = 134 mm
    Eclipse W520R-08 2 5¼” Mid-bass NIB, cut corner frame = 139 mm
    Tang Band W5-704D 4 5¼” Woofer Good, frame = 156.5 mm
    Dayton RS150S-8 2 5-6" Shielded Al. Woofer Like new, frame = 150 mm

  • DanPDanP

    Morel HU 521? F3 of about 52Hz in 3/8 cu ft. Keep saving them for something cool and haven't gotten around to it.

  • jr@macjr@mac

    Great suggestions, all. When I get back to my real computer I will post what I have to trade.

    I have a signature.
  • waffleduckwaffleduck

    I have a pair of unused Fountek FW146 if you'd be interested. Models about the same as some of the above woofers; ~50hz tuning and ~48hz F3.

  • Nicholas_23Nicholas_23

    Have a pair of these, new , mine are pre prestige name badging.

    https://www.seas.no/index.php?option=com_content&view=article&id=73:h1216-08-ca15rly&catid=44&Itemid=238

  • silverDsilverD

    I have a pair of Hi-Vi D5.4-II that seem similar to the dynavox. https://www.parts-express.com/HiVi-D5.4-II-5-Poly-Cone-Neodymium-Woofer-4-Ohms-297-472?quantity=1&srsltid=AfmBOoqnKLiii4g4d51d7Oba5WOnG4RFjhK4u44uISJcgmYKFIT0kXOS

  • rjj45rjj45

    I've been modeling a Wavercor WF120 in 11 Liters (.38 ft^3) ported for a small desktop.
    F3 of 38Hz. But not interested in trades at this time.

    But Chahly - Stahkist don't want speakers that look good, Stahkist wants speakers that sound good!
  • WolfWolf

    @silverD said:
    I have a pair of Hi-Vi D5.4-II that seem similar to the dynavox. https://www.parts-express.com/HiVi-D5.4-II-5-Poly-Cone-Neodymium-Woofer-4-Ohms-297-472?quantity=1&srsltid=AfmBOoqnKLiii4g4d51d7Oba5WOnG4RFjhK4u44uISJcgmYKFIT0kXOS

    I've been curious about those, save for the dustcap logo.

    InDIYana Event Website

  • jr@macjr@mac

    Just realized I still have a pair of 5" Dynavox poly cones I should use up.

    As interesting as some of the offers are here, I am afraid I will have to pass.

    I also have a pair of OEM JBL 5" with cast frames that I should really get mounted and measured.

    I have a signature.
  • silverDsilverD

    What are you planning on pairing them with?

  • jr@macjr@mac
    edited June 21

    I have a pair of Infinity3/4" mmd tweeters that I want to play with. They are shallow waveguide loaded.

    I have a signature.
  • House_DingoHouse_Dingo

    @Wolf said:

    @silverD said:
    I have a pair of Hi-Vi D5.4-II that seem similar to the dynavox. https://www.parts-express.com/HiVi-D5.4-II-5-Poly-Cone-Neodymium-Woofer-4-Ohms-297-472?quantity=1&srsltid=AfmBOoqnKLiii4g4d51d7Oba5WOnG4RFjhK4u44uISJcgmYKFIT0kXOS

    I've been curious about those, save for the dustcap logo.

    Damn we think way too much alike. 😁
    shawn

  • House_DingoHouse_Dingo

    @4thtry said:
    I have a quad set of HiVi F5's that have been sitting on my shelf for years. Not sure if these would work for you. Xmax is only 2.5mm, but a pair of these would produce a nice vented alignment in 0.375 cu ft tuned to 48Hz.

    Out of curiosity, how much would you want for the four of them?
    shawn

  • 4thtry4thtry

    @House_Dingo said:

    @4thtry said:
    I have a quad set of HiVi F5's that have been sitting on my shelf for years. Not sure if these would work for you. Xmax is only 2.5mm, but a pair of these would produce a nice vented alignment in 0.375 cu ft tuned to 48Hz.

    Out of curiosity, how much would you want for the four of them?
    shawn

    I'm not really looking to sell them. They are nice, little mid-bass units with alot of potential. Several years ago, JR actually gave me two of the four that I have on hand. So, since I haven't used them yet, I was just going to send him his original pair back in the event that he wanted to press them into service for a current build (easy come, easy go).

  • House_DingoHouse_Dingo

    @4thtry said:

    @House_Dingo said:

    @4thtry said:
    I have a quad set of HiVi F5's that have been sitting on my shelf for years. Not sure if these would work for you. Xmax is only 2.5mm, but a pair of these would produce a nice vented alignment in 0.375 cu ft tuned to 48Hz.

    Out of curiosity, how much would you want for the four of them?
    shawn

    I'm not really looking to sell them. They are nice, little mid-bass units with alot of potential. Several years ago, JR actually gave me two of the four that I have on hand. So, since I haven't used them yet, I was just going to send him his original pair back in the event that he wanted to press them into service for a current build (easy come, easy go).

    Understood. They’re some really fun woofers to work with. I paired them up with the XG19 tweeter and it was pretty dang nice.
    shawn

    6thplanet
Sign In or Register to comment.