Site Links
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Quick Links
Categories
In this Discussion
Who's Online (5)
- DrewsBrews 3:39PM
- jholtz 3:39PM
- rjj45 3:39PM
- Tom_S 3:39PM
- traw 3:39PM
Please review the site Rules, Terms of Service, and Privacy Policy at your convenience. Rules, TOS, Privacy
Get familiar with the reaction system: Introducing the Reaction System
Comments
https://www.parts-express.com/Sonic-Barrier-Acousta-Blue-Speaker-Cabinet-Sound-Absorbing-Denim-50mm-x-40-x-48-13.3-Sq.-ft.-260-568?quantity=1
Only place I know of, hopefully some others will chime in with options.
https://www.parts-express.com/Sonic-Barrier-Acousta-Blue-Speaker-Cabinet-Sound-Absorbing-Denim-with-1-lb.-Vinyl-30mm-x-260-570?quantity=1
I've used this stuff in a few higher end builds. Cut the vinyl with a utility knife and the denim with a pair of scissors.
I wish I had a good inexpensive source. Once UltraTouch went away the remaining readily available Frost King option had pretty terrible cost:quantity ratio. I started moving towards acoustic foam https://foambymail.com/acoustical-wedge-foam.html
Found this: https://amazon.com/Acoustical-Cotton-Batts-inch-Case/dp/B006C0VIEY
This stuff is pretty good. But I use the stuff JR linked at Parts Express because it's so easy to just add to an order and is good value.
https://www.secondskinaudio.com/acoustics/celluzorbe
This is where I sourced my last batch. Probably the same stuff as the stuff JR linked but a better price. I still have a ton of it though, so unless you need a lot getting a single sheet from PE might make more sense, if not cents.
https://homedepot.com/p/Henry-R-13-ULTRATouch-Recycled-Denim-Insulation-Batt-15-in-x-93-in-HER13445/330252223There are actually 2025 reviews for "Henry Ultratouch" R13 insulation batts at Home Depot. It's showing out of stock right now, but maybe some hope?
Sehlin Sound Solutions
Dang 3.5" thick? Gotta take slices outa that like cake.
PE sells a denim sonic barrier without the vinyl layer and it's less money than the Secondskin product. Both are substantially less than acoustic foam. I use the denim on all my speakers but use foam wherever I need a hole. I use double stick carpet tape to hold it in place.
https://parts-express.com/Sonic-Barrier-Acousta-Blue-Speaker-Cabinet-Sound-Absorbing-Denim-30mm-x-40-x-55-15.2-Sq.-ft.-260-566?quantity=1
You can cut the denim with a good pair of scissors but I find something like is much easier. The screwdriver is just for scale.
Ron
I have most of a bundle of this product left over from when Menards used to carry it.
I use the full thickness for larger speakers. For anything less than about a liter internal volume, it can mess with tuning frequencies, so one has to check that or pull the sheets apart to approximately half thickness, which isn't too difficult in practice
Sehlin Sound Solutions
Same as Scott. I picked up a big bundle of this 3.5" thick Ultratouch stuff from Menards several years ago. Still have alot left over to use on future projects. But it is a real pain to cut. And it gets really messy when you try to pull it apart to reduce the thickness from 3.5" down to half or 1" thickness. I'm all out of the nice 1" thick Ultratouch squares that Menards sold a while back. They were really easy to work with.